In addition to force majeure, there are many factors that will affect the production cycle, such as: special process requirements, the ordering cycle of special materials, and the confirmation time of drawings, color plates, fabrics, hardware, stones, etc., which will all affect the production cycle. Changing the confirmed materials, sizes, etc. during the production process will also cause increased costs and prolongation of the production cycle.
Multi-angle high-definition pictures of furniture, floor plans, soft decoration plans, renderings, etc.
The degree of restoration cannot absolutely reach 100%. Due to factors such as quantity, process, parameters, picture clarity, picture angle, special material procurement, cost, etc., projects customized according to pictures cannot be guaranteed to achieve 100% restoration. The production process of most furniture (except for mass-produced panel furniture) must be purely manual, and there will be certain differences in production marks. It is difficult to ensure that every batch of conventional furniture is exactly the same.
It is recommended to first determine the soft decoration plan and furniture style and size before proceeding with the hard decoration. This will facilitate the designer to reserve a reasonable space for movable furniture in advance, and will also facilitate the coordinated design of hard decoration and soft decoration. After the decoration is confirmed and entered, the furniture can be ordered for production. Setting aside a reasonable production time is an important guarantee of quality.
There are many factors that are affected. Factors such as quantity, quality, raw materials, technological processes and production cycles are all directly related to production costs.
No, the prices vary depending on the category, material, and origin.
No, the prices vary greatly depending on different base materials, processes, quality levels, origins, etc.
The country has corresponding quality standards for furniture manufacturing. Raw materials such as wood, sponges, glue, boards, paints, fabrics, etc. all have environmental protection grade standards. Companies generally provide customers with open production process monitoring, which helps customers get real materials. Material products.
The relationship is very big. The color, texture and density of the surface of different wood are different, and the degree of absorption of paint is different. Therefore, the silkiest paint effect will also be different. Therefore, special attention should be paid when selecting materials. The selected wood and finishing can Whether it meets the desired paint effect of the design.
The visual effect of a large area will be slightly different from that of a small area. Different batches of paint spraying will also have certain color differences.
Because it is not an exposed part, it does not affect the appearance of the product. Due to cost and other factors, we generally use miscellaneous wood that meets the standards of structure, load-bearing, and environmental protection. Currently, this practice is also the practice of most furniture factories. Those with special needs can contact the production The manufacturer agrees otherwise.
uncertain. Appropriate raw materials should be selected according to product style, style, quality and effect requirements.
Private residential projects generally must use base materials of 304 or above standards, and the brushed effect requires sealing and glaze processing. In addition, since stainless steel parts require welding and high-temperature electroplating, the stainless steel may be deformed during the process. Therefore, it is difficult to achieve uniform fit and seams between stainless steel and other materials. Special attention must be paid during the production process.
Commonly used guide rails include: ordinary three-section guide rails, buffer guide rails, rebound guide rails, bottom guide rails, wooden guide rails, etc.; ordinary three-section guide rails and buffer guide rails can be selected according to design requirements, while rebound guide rails, bottom guide rails and wooden guide rails must be selected according to product style, function and Project requirements should be considered comprehensively.
Commonly used filling materials are divided into: high-density sponge, high-elastic sponge, doll sponge, artificial sponge, down, latex sponge, silicone sponge, etc.; depending on product style, style, cost, user preference, etc., the choice of filler will also be different.
Special attention should be paid to the fact that natural stone grows naturally, and the texture of each piece will be different. It is difficult to find the exact same texture as the picture; and natural marble has certain dark cracks, which is normal. If necessary, the surface should be sealed with glaze, and a wooden frame must be built for transportation.
Environmentally friendly, yellowing resistant, high solid content, plump and tough paint film. Some water-based paints are not very hard and prone to scratches, so pay special attention to this when choosing.
Currently commonly used are Taiwan gold, Taiwan silver, Taiwan champagne silver, Taiwan champagne gold, copper gold foil, aluminum foil, etc. Foil products must be allowed enough time to dry during the painting and foiling stages to avoid cracking and peeling of the foil due to insufficient drying time. During the construction process, avoid sweat getting on the foil and causing oxidation and fading.
Can. However, if customizing pure copper accessories involves opening a separate mold, it will lead to higher costs and a longer cycle.
Patterns that are not very special are generally acceptable. The designer needs to provide high-definition pictures that can be molded.
Most of the customized furniture is fully assembled and requires relatively little installation. Only a few larger products and beds need to be installed on-site. Generally, it requires the assistance of a master with professional skills.
Before customizing, it is necessary to confirm whether it can enter the elevator, corridor and door according to the size of the furniture; if not, it is necessary to make disassembly and assembly requirements before production.
Open paint can be divided into fully open and semi-open. Open paint is a wood coating process compared to closed paint. It is a painting process that completely exposes the pores on the wood surface. Its main component is polyurethane, which has a small concentration and shows obvious wood pores.The texture is clear, the amount of paint applied is small, matt, and the natural texture is strong.Sealing paint is a coating process whose main feature is to bury the wood tube holes deeply in the coating layer. Its main component is unsaturated resin with high concentration. It is characterized by a plump, thick, bright and smooth surface coating on the furniture surface. .
For solid wood frame furniture, if the moisture content of the wood is too high or too low, and the environment is too dry or humid, it will cause the furniture to shrink, deform, or crack. The reason for the deformation of board-wood structure furniture is usually because the thickness of the board does not meet the load-bearing standards, or the structure is unreasonable. Caused.
When selecting materials for the production of furniture, please pay attention to: wood with knots, internal cracks, blue stains, rotten wood, end cracks, and moldy wood cannot be used. Wood that does not meet the regional equilibrium moisture content is easy to crack and deform. Wood with knots is easy to crack. The heartwood of the wood is easy to crack. Different from the color of sapwood, honeycomb-shaped wood is not stressed. When splicing wood, pay attention to the direction of the grain. The horizontal grain is easy to break under stress. These problems must be avoided when selecting materials. Select high-quality wood with no knots and up to standard moisture content.
Avoid direct sunlight. Prolonged exposure to the sun may cause cracks and partial fading.
In humid springs and summers with more thunderstorms, when cleaning solid wood furniture on a daily basis, you can use a clean soft cloth dipped in furniture-specific materials and gently wipe it to remove dirt. This type of cleaner can form a protective film on the surface of solid wood furniture. , to prevent water vapor inside the furniture to a certain extent; in the drier seasons of autumn and winter, use a slightly damp soft cloth to gently wipe along the grain of the wood to keep the moisture content of the solid wood furniture from cracking; be careful not to wipe with a dry cloth to avoid scratches.
every space
All contain unique
soul.
Email: muchicasa@163.com
Landline: 0757-23631538
Phone: 138 2725 4698
Shunde District, Foshan City, Guangdong Province, China
Room 409, Building E, Lelong International Creative City
